The Model 3022-10 Gate Safety Edge Transmitter is for adding obstacle sensing for motorized gates or barrier arms. Using a safety edge transmitter is more economical and discrete than the traditional coiled cord connection method.
The transmitter mounts directly on the gate or barrier arm and wires to a standard exterior safety edge sensor (a Miller gate edge sensor is recommended). If an obstacle is encountered, the sensor will present a closed circuit across the connecting wires and the 3022-10 will transmit a message to the receiver signaling entrapment to the gate operator. The operator then stops or reverses the movement of the gate.
The 3022-10 transmitter is supplied in a weather-resistant, fiberglass box. Its circuit board is coated to prevent moisture damage. The enclosure mounts to the gate, door, or barrier arm through sealed interior mounting screws.
The Model 3022-10 is compatible with 300 MHz Multi-Code receivers and Model 1099-50 and 3028-50 receivers.
Features
•Compatible with 300 MHz Multi-Code receivers
•Safety edge transmitter
•Activates receiver for stop or reverse entrapment
•No cables or coiled wires
•Mounting hardware (4 screws) supplied
•Powered by 9-volt battery
•1,024 codes
•Frequency: 300 MHz
•4" W x 4.28" H x 2.2" D
