Replaces Multi-Code 1099-30, 1099-40, 3028-50, and Stanley 1099-31 receivers. This unit is also compatible with Multi-Elmac 10 DIP code switch type gate or garage door remotes.
The Model 1099-20 1-Channel, 110V, Gate Receiver is designed for use in gate operator applications. An 11-inch wire whip antenna is included for local reception. The whip antenna connects to the receiver's Type-F antenna connector. If the receiver is mounted inside a shielded metal enclosure, such as a gate operator housing, an external Model 1066 Remote Whip Antenna should be used.
The receiver includes a 24-volt AC power transformer that plugs directly into a 115 VAC power outlet. The normally open relay output can switch up to 1 amp @ 30 VAC. A 3-foot, 2-conductor wire lead with spade lugs is provided for attachment to the gate operator's radio activation terminals.
The receiver is programmed with a 10-position coding switch. When a Multi-Code transmitter set to the same code is activated, the receiver's output will activate, triggering the gate operator.
The Model 1099 is compatible with 300 MHz Multi-Code transmitters only.
Features
•Operates on 115 VAC power
•One channel
•Whip antenna
•1,024 codes
•RF frequency: 300 MHz
•3.625" W x 5.25" H x 1.5" D
