Payment Options: Money Order, Cashier's Check, Personal Check,
The Model 1099 1-Channel, 12-24V, Gate Receiver is designed for use in gate operator applications. An 11-inch wire whip antenna is included for local reception. The whip antenna connects to the receiver's Type-F antenna connector. Also included is 3-feet of coax cable and a bulkhead connector for remotely mounting the whip antenna in installations where the receiver is mounted inside a shielded metal enclosure, such as a gate operator housing. An external Model 1066 Remote Whip Antenna can also be used with this receiver.
The Model 1099 is a dual frequency receiver. An internal jumper selects either 300 MHz or 310 MHz operating frequency. The 300 MHz frequency is compatible with standard Multi-Code transmitters, the 310 MHz frequency is compatible with the Stanley version Multi-Code transmitters.
The operator supplies 12-24 volt power to the receiver, or the receiver can be powered by a separate AC power transformer or DC power supply. The normally open relay output can switch up to 1 amp @ 30 VAC. A 3-foot, 2-conductor wire lead with spade lugs is provided for attachment to the gate operator's radio activation terminals.
The receiver is programmed with a 10-position coding switch. When a transmitter set to the same code is activated, the receiver's output will activate, triggering the gate operator.
The Model 1099 is compatible with Multi-Code and Stanley transmitters only.
•Operates on 12-24 volts AC or DC power
•3-foot antenna coax and bulkhead connector
•RF frequency: 300 MHz or 310 MHz (jumper selectable)
•3.625" W x 5.25" H x 1.5" D
•Linear Part Number 1099-50
PLEASE NOTE THAT MANY PRODUCTS MAY LOOK THE SAME, BUT OPERATE ON DIFFERENT FREQUENCIES (288/300/310/315/372/390). THEREFORE IF YOU ARE UNSURE AT ALL IF THIS IS THE CORRECT ITEM FOR YOU, PLEASE EMAIL US AT SALES@DOOROPENERSANDMORE.COM AND WE WILL GLADLY MAKE SURE YOU GET THE RIGHT PART THE FIRST TIME.